We use cookies to make your experience better. Read more
Waterproof Amber LED Strip Standard 60 LEDs/m
Out of stock
SKU
STRIP1W-UA
1m Standard Waterproof LED strip - AMBER
High quality, self-adhesive LED strips. The LEDs are connected in blocks of 3 so the strip can be cut in
between each of these blocks. There are markings on the PCB showing where to cut, also there are
solder pads on the PCB showing where wires can be re-connected to the cut part, this can then be
connected to 12V.
The LED strips require 12V for optimum performance, but will also work happily from a 3 cell (11.1V) lipo
battery. Although the strips will work from lower voltages (reasonable light can still be optained as low as
9.0V) there is a marked reduction in brightness.
Specification:
Operating voltage: 12.0V dc
Current requirement: 400mA per m
Width: 8.0mm
Height: 2.4mm
Waterproof, self-adhesive version of the above LED strips. Exactly the same strips as above, but
coated ion a highly flexible resin/gel material, making the strips not only waterproof, but also
more resistant to damage due to knocks / bangs etc.
Specification:
Operating voltage: 12.0V dc
Current requirement: 400mA per m
Width: 8.0mm
Height: 2.9mm
LED strip Comparison Table |
| |||
---|---|---|---|---|
Type | Width | LEDs / m | Current / m | Minimum cut size |
Standard | 8mm | 60 | 400mA | 50mm |
Standard, High Density | 8mm | 120 | 800mA | 25mm |
High Power | 10mm | 30 | 600mA | 100mm |
High Power, High Density | 10mm | 60 | 1.2A | 50mm |
SKU | STRIP1W-UA |
---|---|
Colour | Amber |
Colour | Black |
Gift Type | Virtual |
Write Your Own Review