Component Shop logo

CALL US:01248 719353
Mon - Fri
10:00am - 4:30pm

Welcome to Component-Shop !


Intelligent 500mA smart charger for 4-10 NiMH / Ni-Cd airsoft cells packs (inc. Airsoft charger adapter) EU Version

Be the first to review this product

Availability: In stock

Only 6 left


Quick Overview

EU Version Charges 4-10 cell NiCd or NiMH battery packs. (4.8V - 12V) Delta-Peak microprocessor controlled charging, switches to trickle charge once pack is charged. LED shows when charging & when complete. EU 2-pin mains plug


Smart & Fast Charger for 4~10 Cells Battery Packs

This Charger is designed to charge Nickel-Metal Hydride or Nickel Cadmium 4~10 Cells battery packs with Standard Tamiya Male Connector. This is a Smart Charger, which can distinguish 4~10 cells pack by MPU inside Automatically and cut-off the charging accordingly. It is easy to use. Manual-adjustment is not needed. By using different adaptors, this charger can be used to charge battery packs with Futaba Female connector, JR Female connector, Tamiya Small Male connector, Micro Female connector etc.

Input Rated Voltage & Line Frequency: 240VAC 50Hz
Rated Voltage: DC18.0V+-5%
Rated Current: DC500mA
Rated Cells Pack: 4~10 Cells
No Load Voltage: DC23.5V Max
Trickle Current: 60mA Max
Short Circuit & Reverse Polarity
Protection included



  • Recharges 4~10 pieces cells battery packs 
  • Ni-MH/Ni-Cd batteries with Standard Tamiya 
  • Male connector. 
  • Microprocessor-control System (For protection and safety). 
  • Batteries life is well protected by –dV detection and timer protection. 
  • LED display for Rapid charge/trickle charge 
  • Red LED- rapid charge 
  • Green LED- Fully Charged & trickle charge 
  • Flash Red and Green LED- short 
  • Flash Red LED: Reverse polarity or Wrong Battery 
  • Safety features:  -dV cut-off function 


  1. Connecting 1 pack of 4~10 cells pack with Tamiya Male connector to the Female connector of the charger. 
  2. Make correct contact of the Female and Male connectors. 
  3. Plug charger into mains socket. 
  4. The status LED will glow Red when the batteries are receiving charge. After charge is completed, the status LED will change green to indicate that the charge is completed and batteries are ready for use. Once the status LED is Green, the charge switches to trickle mode to keep the batteries at full. 
  5. Unplug the charger and remove the batteries from the charger when not in use. 

Mechanical Specification:

  1. Plastic Case: 70×40×28mm 
  2. Output DC Cord: 26AGW×1500mm×2C 

Operating temperature: 0~35℃
Short Circuit Protection: 20mA

Charging Table

Size Input Output current
Voltage Current
4 cells 16V  240mA  500mA 
5 cells  16V 280mA  500mA 
6 cells  16V 396mA  500mA 
7 cells  16V 423mA   500mA 
8 cells  16V 450mA   500mA 
9 cells  16V 480mA   500mA 
10 cells  16V 500mA   500mA 


Charging time

Size Charging current Charging Time
800mAh 500mA 1.5 hours
1600mAh 500mA 3.3 hours
2000mAh 500mA 4.7 hours
2600mAh 500mA 6 hours
3000mAh 500mA 6.5 hours
3300mAh 500mA 7 hours
3700mAh 500mA 8 hours
4300mAh 500mA 9 hours
4600mAh 500mA 10 hours
5000mAh 500mA 11 hours


*Charge time will vary depending upon the brand,
capacity and condition of batteries being

Important Safety Instructions

  1. Before charging, read instruction. 
  2. This charger is intended for use with Nickel-Cadmium and Nickel-metal-hydride rechargeable batteries only. Attempting to charge other types of batteries may cause personal injury and damage to the charger. 
  3. Recharge only one type of battery (Ni-Cd or Ni-MH) at each time. 
  4. Do not expose charger to rain or moisture. For indoor use only. 
  5. Remove from mains when not in use. 
  6. Never use an extension cord or any attachment not recommended by manufacturer, otherwise this may result in a risk of fire, electric shock or injury to persons. 
  7. Do not operate the charger if it has been subjected to shock or damage. Take it to a qualified serviceman for repair. 
  8. Do not disassemble the charger. Incorrect reassembly may result in a risk of electric shock or fire. 
  9. Unplug the charger from outlet before attempting any maintenance of cleaning.

Additional Information


Write Your Own Review

You're reviewing: Intelligent 500mA smart charger for 4-10 NiMH / Ni-Cd airsoft cells packs (inc. Airsoft charger adapter) EU Version

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Compare Products

You have no items to compare.

UK Postage From only L1.50 Minimum Order from just L3.00 Questions are answered from Monday to Friday Phone Support Mon-Fri 10:00-16:30 GMT UK postage from £1.50

Shop by Brand

UK Main Vapex-Tech Agent


Component-Shop Ltd.


Tel: 01248 719353


Directions via Google Map click here