My Basket
You have no items in your shopping basket.
Welcome to Component-Shop !
Details
Top Featues:
♦ Dual Direction Running
♦ Lithium Battery Supported
♦ Low Voltage Protection
♦ Over Heat Protection
♦ USB Supported
♦ Program Box Supported
Detailed Features:
-
Specially designed for RC car and truck, with excellent start-up, acceleration and linearity features.
-
Compatible with sensorless brushless motor.
-
3 running modes suitable for different applications (“Forward with brake" mode, “Forward/Backward with brake” mode and “Rock crawler” mode).
-
4 steps of maximum reverse force adjustment.
-
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
-
9 start modes (“Punch") from “Soft” to “Very aggressive" to be suitable for different chassis, tires and tracks.
-
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
-
8 steps of timing adjustment.
-
User programmable. Several program methods are supported, such as: The “SET" button on the ESC, the digital LED program card, etc. The program card is pocket-sized and it has friendly user interface to be easily used.
-
Dustproof.
|
Output： |
Continuous current 18A, burst current 50A. |
|
Input： |
4-9 cells NiMH/NiCd or 2-3 cells LiPo. |
|
BEC Output： |
6V/1A. |
|
Resistance： |
0.01 Ohm. |
|
Motor Supported： |
Sensorless Brushless Motor |
|
Suitable Brushless Motor： |
With 4-6 cell NiMH/NiCd or 2S LiPo: On-Road≥12T*, Off-Road≥18T; |
|
Battery: |
4-9 Cells NiMH or 2-3 Cells LiPO For 7-9 NiMH Cells and 3 Cells LiPO you must change the fan combined with the controller because it cannot work with suach a high voltage, so please choose a high voltage fan oir supply the fan from the receiver (+5V) |
|
Suitable Car： |
1/16 and 1/18 on-road or off-road cars / trucks |
|
Size： |
31.5mm(L) 24mm(W) 15mm(H). |
|
Weight： |
27g(With wires) |
* These listed T numbers are available for 2030 size brushless motor (Ø=24, L=30)
|
Programmable |
Programmable Value |
||||||||
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
|
|
Basic Items |
|||||||||
|
1.Running Mode |
Forward with Brake |
Forward/Reverse with Brake |
Rock Crawler |
|
|
|
|
|
|
|
2. Drag Brake Force |
0% |
5% |
10% |
20% ; |
40% |
60% |
80% : |
100% |
|
|
3. Low Voltage Cut-Off Threshold |
Non-Protection |
2.6V/Cell |
2.8V /Cell |
3.0V/Cell |
3.2V/Cell |
3.4 V/Cell |
|
|
|
|
4.Start Mode (Punch) |
Level1 (Soft) |
Level2 |
L3 . |
, L4 |
L5 |
L6 |
L7 |
L8 |
L9 (Very Aggresive) |
|
Advanced Items |
|||||||||
|
5.Maximum Brake Force |
25% |
50% |
75% |
100% |
|
|
|
|
|
|
6.Maximum Reverse Force |
25% |
50% |
75% |
100% |
|
|
|
|
|
|
7. initial Brake Force |
= Drag Brake Force |
0% |
20% |
40% |
|
|
|
|
|
|
8. Neutral Range |
6% (Narrow) |
9% (Normal) |
12% (Wide) |
|
|
|
|
|
|
|
9.Timing |
0.00° |
3.75° |
7.50° |
11.25° |
15.00° |
18.75° |
22.50° |
26.25° |
|
|
10. Over-heat Protection |
Enable |
Disable |
|
|
|
|
|
|
|
| Default Settings |
Additional Information
| SKU | Ground18A |
|---|---|
| Manufacturer | Leopard-Hobby |
Customer Reviews
- OK but slight problem with instructions Review by NoNuFink
-
I have only tested this ESC briefly to prove it worked, which it did. However, I also bought the programming card which makes programming the ESC a doddle. I later tried to program using the 'SET' switch. This invovlves looking ar LEDs. So where are the LEDs? Not detailed in the instrns (unless I missed it). The plastic box appears to be opaque plastic with a flat base which is where you would use the sticky pads provided to mount it. It turned out that the LEDs are inside the box and shine brightly through the plastic base (obviously not as opaque as it looks) so you can't see them if it's mounted in the logical fashion. Other than that no problems - I advise get the programming card as well. (Posted on 17/07/2015)Price Value Quality - Just the job. Review by hilarypb
-
Program card allows for set up to meet my boating requirements exactly with instructions even a novice like me can understand - short trial run only to date / performed beautifully with soft starts and gentle spin turns on motor only. (Posted on 14/05/2015)Quality Price Value
Write Your Own Review
Compare Products
You have no items to compare.
Latest Review
Download our 2018 catalogue
Shop by Brand
