Red LED Strip Standard High-Density 120 LEDs/m

In stock
SKU
STRIP2-SR
As low as £3.50
1m Standard High-Density LED strip - RED

High quality, self-adhesive LED strips. The LEDs are connected in blocks of 3 so the strip can be cut in
between each of these blocks. There are markings on the PCB showing where to cut, also there are
solder pads on the PCB showing where wires can be re-connected to the cut part, this can then be
connected to 12V.
The LED strips require 12V for optimum performance, but will also work happily from a 3 cell (11.1V) lipo
battery. Although the strips will work from lower voltages (reasonable light can still be optained as low as
9.0V) there is a marked reduction in brightness.

Specification:
Operating voltage: 12.0V dc
Current requirement: 800mA per m
Width: 8.0mm
Height: 2.4mm

 

LED strip Comparison Table

 

Type

Width

LEDs / m

Current / m

Minimum cut size

Standard

8mm

60

400mA

50mm

Standard, High Density

8mm

120

800mA

25mm

High Power

10mm

30

600mA

100mm

High Power, High Density

10mm

60

1.2A

50mm

More Information
SKU STRIP2-SR
Colour Black
Gift Type Virtual
Write Your Own Review
You're reviewing:Red LED Strip Standard High-Density 120 LEDs/m

Brands

Component Shop
VP Racing
Leopard Hobby
VP Flight
Vapex-Tech
VP Airsoft
Giant Power
Minwa
GP Batteries
Warton Metals Limited
ACTion Electronics
Eneloop
Eneloop Pro
OUTDO (Huawei)
  • Best Seller
  • Latest Products
  • Featured Products
 
 
 
Red LED Strip Standard High-Density 120 LEDs/m