We use cookies to make your experience better. Read more
850 12V DC Motor with 2.1:1 belt Reduction drive MFA
Voltage: 12V; RPM: 3957 (12v); Weight: 745g; Dimensions: 115 x 62 x 95mm
This unit has been developed to meet a requirement for heavy duty high torque applications combined with relatively low power consumption.
The unit is powered by MFA/Como Drills 850 series 12v d.c. 3 pole motors, with heavy duty carbon brush gear and double ended 6mm drive shaft. The motor is mounted on a rugged 1.5mm steel right angle bracket. The 2.1:1 reduction is achieved via two precision aluminium timing pulleys utilising a high quality toothed timing belt. The final drive is delivered through two block mounted precision ballraces with a 6mm keyed steel output shaft.
Motor Specifications:
Type | Voltage (V) | At max efficiency | No load | Weight | |||||
719-RE850 | Nominal 9constant) | Voltage | RPM | Current (A) | Power (W) | Torque (gf/cm) | RPM | Current (A) | 595 |
12 | 12 | 8311 | 10,82 | 80,16 | 939.46 | 9778 | 1,9 |
Dimensions: 83.6 x Ø51.8 mm (without bracket and shaft)
Weight: 595g
Shaft Length: 13.2mm
Shaft Dia: 6.35mm
Geared Motor Specifications:
Dimensions: 115 x 62 x 95mm
Weight: 745g
Shaft Diameter: Ø6mm (5.7 indent mm)
Gearbox Ratio: 2.1:1
RPM:
- 3957 (12v) At max efficiency
Torque: 1380g.cm
Note: Motor speeds may vary by (+) or (-) 12.5%
SKU | 850B |
---|---|
Gift Type | Virtual |
Write Your Own Review