Advanced LED Strip RGB controller

Out of stock
SKU
CTRL-RGB2
£9.95

Functions: Pre-set colours, Fade, Brightness, Custom colours, Pre-set effects, Vary speed, Custom effects.

Led ColorRGB
Voltage12v
Wattage24W/Ch
Power Usage in Off or Standby StateLess than 1W
Power Rating Max Amps2A/Ch
Power Rating Max Watts72 Watts
Output Power6A 72 Watts Total
Number Of Chanels3
Rated Amps / Ch2A/Ch
Recommended Power Supply Size1-6A (12-72 Watt)
Connections Input/Output

Input: Use our barrel plug 12V DC (our power supplies plug into this port) or our female barrel plug for connecting to 12v DC car, truck, motorcycle, and boat batteries.

IR Receiver: The receiver is on a cord so that it can be placed in view even if the receiver is behind doors.

Output: Has 4-Pin jack for connecting to our RGB Flex Strips (you can solder our 4-Pin connector to the strip and plug in this remote).

 

Note: Ensure short circuit can not occur between connecting wire before you turn on the power

Power Input: Connection Type, Voltage, AmperageBarrel Plug 12V DC
Output Connection Type4-Pin Jack for our 4-Pin Connectors
Can Power/Control (xx) Feet of stripCan control 32' of our 12V RGB Flex Strip.
Controllable ByIR Remote (infrared remote - like a TV remote it does not go through walls)
Number Of Control Modes44 Buttons
Mode/Button Decription

 

The key-press functions are shown in the table below (in accordance with the key position order):

Brightness rise 
(a total of eight steps) 
(will adjust pink squares) 

Brightness fall 
(a total of eight steps) 
(will adjust pink squares)

Pause/Run 
(Will pause fade or flash to stay on that color)

On/Off

Red

Green

Blue

White

Orange

Light green

Dark blue

Milk white

Dark yellow

Cyan

Lyons blue

White pink

Yellow

Light blue

Purple

Green white

Light yellow   

Sky blue

Brown

Blue white

Increase Red

Increase Green

Increase Blue

Speed up 
(Will adjust Light Blue squares)

Decrease Red

Decrease Green

Decrease Blue

Speed down 
(Will adjust Light Blue squares)

DIY key1

DIY key2

DIY key3

Automatic change 
(cycles through fade/flash modes)

DIY key4

DIY key5

DIY key6

White strobe

3 color jumping change

7 color jumping change

3 color fading change

7 color fading change

 

The DIY (do it yourself) key, when pressed for the first time, will enter the DIY color mode.  You can adjust each individual color brightness with the 6 keys shown above.  However, if another key is pressed it will jump out of DIY color mode without saving your settings.  In order to save the color which you have just created, you must press the same DIY key which you originally selected once again within 5sec.  The next time this key is pressed, it will display the color which you saved the last time.  There are 6 DIY keys, so you can save your favorite 6 colors/brightnesses.

Dimmable Range / Steps8x steps of dimming control in normal mode and full 0-100% in DIY mode
Product Size (L)x(W)x(H)(Receiver L63ΧW35ΧH22 mm) (Remote L125ΧW56ΧH7mm)
Comes WithRemote Control and Receiver
Suggested AccessoriesCan be used with amplifiers to control more than 2x reels (10 meters) of RGB flex strip
More Information
SKU CTRL-RGB2
Gift Type Virtual
Write Your Own Review
You're reviewing:Advanced LED Strip RGB controller

Brands

Component Shop
VP Racing
Leopard Hobby
VP Flight
Vapex-Tech
VP Airsoft
Giant Power
Minwa
GP Batteries
Warton Metals Limited
ACTion Electronics
Eneloop
Eneloop Pro
OUTDO (Huawei)
  • Best Seller
  • Latest Products
  • Featured Products