We use cookies to make your experience better. Read more
Intelligent 500mA Smart Charger for 4.8V-12V NiMH NiCd Race RC Batteries Vapex
New Design Charges 4-10 cell NiCd or NiMH battery packs. (4.8V - 12V) Delta-Peak microprocessor controlled charging, switches to trickle charge once pack is charged. LED shows when charging & when complete. UK 3-pin mains plug
Smart & Fast Charger for 4~10 Cells Battery Packs
This Charger is designed to charge Nickel-Metal Hydride (NiMH) or Nickel Cadmium (NiCd) 4~10 Cells battery packs with the Standard Tamiya Connector. This is a microprocessor controlled Smart Charger, which can automatically distinguish 4~10 cell packs. Automatically cut-off once charging is complete. Easy to use, no manual adjustment required. By using different adaptors, this charger can be used to charge battery packs with Futaba, JR, Mini-Tamiya, XT60, EC5 connectors etc.
Input Rated Voltage & Line Frequency: 240VAC 50Hz
Rated Voltage: DC18.0V+-5%
Rated Current: DC500mA
Rated Cells Pack: 4~10 Cells
No Load Voltage: DC23.5V Max
Trickle Current: 60mA Max
Short Circuit & Reverse Polarity
Protection included
Features:
- This charger is fitted with a standard tamiya male connector (male housing with female contacts inside) we can supply adapters for just about any other connector, just contact us if you cannot find the adapter you need.
- Recharges 4~10 cell battery packs
- Ni-MH/Ni-Cd batteries with Standard Tamiya connector
- Microprocessor-control System (For protection and safety).
- Battery life is protected by –dV detection and also timer protection.
- LED display for Rapid charge/trickle charge
- Red LED- rapid charge
- Green LED- Fully Charged & trickle charge
- Flash Red and Green LED- short
- Flash Red LED: Reverse polarity or Wrong Battery
- Safety features: -dV cut-off function
OPERATION INSTRUCTIONS :
- Connect 1 pack of 4~10 cells with Tamiya connector to the charger. (using adapter if necessary)
- If using an adapter, ensure that the polarity of the contacts is correct.
- Plug charger into mains socket.
- The status LED will glow Red when the batteries are receiving charge. After charge is completed, the status LED will change green to indicate that the charge is completed and batteries are ready for use. Once the status LED is Green, the charge switches to trickle mode to keep the batteries at full.
- Unplug the charger and remove the batteries from the charger when not in use.
Mechanical Specification:
- Plastic Case: 70×40×28mm
- Output DC Cord: 26AGW×1500mm×2C
Environmental
Operating temperature: 0~35℃
Short Circuit Protection: 20mA
Charging Table
Size | Input | Output current | |
Voltage | Current | ||
4 cells | 16V | 240mA | 500mA |
5 cells | 16V | 280mA | 500mA |
6 cells | 16V | 396mA | 500mA |
7 cells | 16V | 423mA | 500mA |
8 cells | 16V | 450mA | 500mA |
9 cells | 16V | 480mA | 500mA |
10 cells | 16V | 500mA | 500mA |
Charging time
Size | Charging current | Charging Time |
800mAh | 500mA | 1.5 hours |
1600mAh | 500mA | 3.3 hours |
2000mAh | 500mA | 4.7 hours |
2600mAh | 500mA | 6 hours |
3000mAh | 500mA | 6.5 hours |
3300mAh | 500mA | 7 hours |
3700mAh | 500mA | 8 hours |
4300mAh | 500mA | 9 hours |
4600mAh | 500mA | 10 hours |
5000mAh | 500mA | 11 hours |
*Charge time will vary depending upon the brand,
capacity and condition of batteries being
charged.
Important Safety Instructions
- Before charging, read instruction.
- This charger is intended for use with Nickel-Cadmium and Nickel-metal-hydride rechargeable batteries only. Attempting to charge other types of batteries may cause personal injury and damage to the charger.
- Recharge only one type of battery (Ni-Cd or Ni-MH) at each time.
- Do not expose charger to rain or moisture. For indoor use only.
- Remove from mains when not in use.
- Never use an extension cord or any attachment not recommended by manufacturer, otherwise this may result in a risk of fire, electric shock or injury to persons.
- Do not operate the charger if it has been subjected to shock or damage. Take it to a qualified serviceman for repair.
- Do not disassemble the charger. Incorrect reassembly may result in a risk of electric shock or fire.
- Unplug the charger from outlet before attempting any maintenance of cleaning.
Note: European Customers will receive EU PLUG unless they notify us that they require UK PLUG
SKU | VTE500P |
---|---|
Colour | Black |
Gift Type | Virtual |
Write Your Own Review