My Basket
You have no items in your shopping basket.
Welcome to Component-Shop !
Details
This unit is extremely easy to use, simply connect the positive & negative input wires to the terminals as shown on the picture above & do the same for the output wires.
To adjust the output voltage you will need a small flat blade screwdriver. With power connected to the input terminals, but not the output, adjust the multi-turn potentiometer to get the desired output voltage. (anti-clockwise to reduce the output voltage.) The display select button when pressed will switch the display between input voltage, output voltage & automatically switching between the two. When the input voltage is being displayed the small red LED on the circuit board is lit.
Once the output voltage has been set, it will remain at that level regardless of the input voltage - unless the input voltage drops to within approx 0.3V of the output voltage, in which case the output voltage will decrease.
Weight: 18.5g
Dimensions (L x W x H): 63 x 26 x 14mm
Additional Information
| EAN | No |
|---|---|
| Capacity (mAh) | No |
| SKU | LM2596S-disp-CB |
| Wire Gauge | No |
| Country of Manufacture | |
| Manufacturer | No |
| Custom Stock Status | No |
Customer Reviews
- Quality Item at price Review by bb dyson
-
This is a very useful piece of kit. Use this instead of resistors for the control of multiple LED'S. Also nice to see the voltage output on the display. In my boat I had about 12 various lights but did not have the voltages of every bulb/LED as I did not built it myself.Price Value Quality
Set the control at lowest setting and slowly increased until the bulbs were at the correct voltage (in this case 4 volts) (Posted on 02/08/2015)
Write Your Own Review
Compare Products
You have no items to compare.
Latest Review
Download our 2019 catalogue
Shop by Brand
