Battery Balance Voltage Detector / Tester LCD-6

Battery Detector LCD-6 Manual

Features

1. Use for RC models' battery voltage diagnosis and measurement.
2. High precision display of unit cell voltage for 2-6cells Lixx packs or 4-18 cells Nixx packs
3. 57mmX32mm large LCD can display up to 6cells unit voltage & total voltage clearly & directly.
4. Reverse polarity protection for cell input

Specifications

1. Use for 2~6 cells Lipo/Li-ion/LiMn
2. Voltage display resolution: 0.01V. Voltage detection precision: lOmv
3. Unit voltage display range: 3.00-4.50V,
4. Total voltage display range: 4.80-27.00V
5. Current loading of test: <10mA
6. Pins distance: 2.54mm
7. Size: 81x45x10mm, Weight: 32g

Instructions

1. Input total voltage should be 4.80V~27.00v. If the total voltage is under 4.80V, there is no display on the LCD. If the unit voltage is above 27.00V. it will hurt the LCD-6.
2. For Lixx packs: Connect the LCD-6 to the battery' s balance adapter, and attention the anode 8( cathode. If the polarity is reversed, no display on the LCD screen.If the battery is below 6 cells, connect the balance adapter from the cathode side.After the LCD-6 detect right input, LCD screen will display total voltage and unit voltage. From the Left-up to the right-down, unit voltage is the 1st to 6th
3. For Nixx packs: Connect the LCD-6 to the battery's output cable. After the LCD-6 detect right input, LCD screen will display total voltage.