P112 Fused Power Distribution Board (no power switch)

Fused Power Distribution Board with Main Power Switch. 

The P112 is the latest Power Distribution Board developed to provide a neat solution to the frequent “rat ’s nest ” wiring which results from multiple units being installed in a R/C model boat. It takes the power from the main supply batter y - which can be Lead-Acid, Nickel Cadmium , Nickel Metal Hydride or Lithium Polymer - and routes it via a set of four pairs of terminals, each pair being protected by a separate fuse (car blade type) Each output pair has an LED to show that power is present, the LED will not light if the fuse has blown.
The P112 uses a very high-quality epoxy-glass laminated board with extra-thick copper tracks to carry a maximum rated current of 25A total for all outputs, maximum load on any single output is 16A. Maximum conductor cross-section for the input leads is 2.5 sq mm and for the output leads, 1.5 sq mm.
The unit is supplied either in kit form or ready-built and checked. Each unit comes with a selection of fuses including 2x 3A, 4x 5A & 2x 10A.
The P112 is available in two forms, with or without a main power switch. Also multiple P112s can be linked together to give more outputs from a single input (the maximum of 25A across all outputs still applies.