We use cookies to make your experience better. Read more
P108 20A Autoset Computer Speed Controller with 1A BEC ACTion Electronics®
The P108 is the successor to the long popular P80 speed controller, however, whilst it still has the reliability of Action Electronics, it differs from its predecessor in 2 important (& very useful ways)
1) The P80 did not have a BEC, so required a separate battery or other means of powering the receiver. The P108 features a built in 1A (1.2A peak) BEC.
2) The P80 came with a standard plastic box which required holes cutting in it before use. The P108 is built into a custom designed 3D printed ABS enclosure, so it is ready to run straight out of the packet.
The P80 Computerised 20A speed controller for scale model boats, recommended for 380/385/390/400/540/545/550/555/600/700/750/755/775/800/850 series motors.
Working voltage range: 3.5V - 18V.
Built in 1A (1.2A peak) BEC (Battery eliminator circuit) which is ample to power the receiver plus small servos.
AUTOSET centre stick setting (allo at least 5 seconds from power up for the ESC to detect neutral point)
16awg silicon leads (to bare ends) for power input (red & black) and motor output (yellow & blue)
We are happy to fit connectors to the leads for a nominal cost (to cover the cost of the connectors used) just contact us either by phone or e-mail prior to ordering for details.
External size 54.5mm x 39.0mm x 20.7mm
1) The P80 did not have a BEC, so required a separate battery or other means of powering the receiver. The P108 features a built in 1A (1.2A peak) BEC.
2) The P80 came with a standard plastic box which required holes cutting in it before use. The P108 is built into a custom designed 3D printed ABS enclosure, so it is ready to run straight out of the packet.
The P80 Computerised 20A speed controller for scale model boats, recommended for 380/385/390/400/540/545/550/555/600/700/750/755/775/800/850 series motors.
Working voltage range: 3.5V - 18V.
Built in 1A (1.2A peak) BEC (Battery eliminator circuit) which is ample to power the receiver plus small servos.
AUTOSET centre stick setting (allo at least 5 seconds from power up for the ESC to detect neutral point)
16awg silicon leads (to bare ends) for power input (red & black) and motor output (yellow & blue)
We are happy to fit connectors to the leads for a nominal cost (to cover the cost of the connectors used) just contact us either by phone or e-mail prior to ordering for details.
External size 54.5mm x 39.0mm x 20.7mm
| SKU | P108 |
|---|---|
| Colour | Black |
| Gift Type | Virtual |
Write Your Own Review
