Panel mount Battery voltage display & switch

Panel mounting, heavy duty receiver switch:

• fitted with male & female Futaba leads, simply connect in between the battery & receiver. 
• Aluminium extrusion is both light weight & very strong. 
• The circuit will handle up to 15 Amps (Peak 20A), however, the switch is only rated to handle 5 Amps, so this can be used with quite high loads as long as you don't need to switch the load off or on when the current demand is high. 
• Futaba leads can easily be unsoldered from the PCB & other leads attached if required.
• Dimensions of mountable hole:  45 x 20mm (Depth: 28.3 mm)
• Dimensions of Panel: 23.8 x 61.1 mm
• Molded plastic case
• Heavy duty 22awg leads
• Weight: 27g