Super-Fast Smart Charger for 8x AA/AAA Batteries Vapex

 

Safety Features:

•  +∆V, -∆V, 0∆V cut-off function 
•  Safety timer to prevent over charge 
•  Reverse-polarity protection 
•  Bad cell Detection 

OPERATION INSTRUCTIONS:

1.  Insert 1 to 8 pieces of AA/AAA rechargeable Ni-MH batteries into the battery compartment.
2. Make correct contact for polarity (+ and –); according to the sign in the battery compartment. 
3. Plug the charger into a correct house-hold electric outlet. 
4. The LCD will flash to check the charge status of the batteries, after 10 seconds or so, LCD display will indicate charging status, such as ‘Charging’, ‘Full Charge’ or ‘Wrong battery’, and LCD display will also show the charging levels of each cell, such as from Empty icon, one segment, two segment to full icon. After full charge, the LCD display will stay on Full Icon, charge current turns to trickle current of 50mA each. And the backlight will be always light till full charge. 
5. Unplug the charger and remove the batteries from the charger when not in use. 

Begin against step 1 to charge the next set of batteries.

Bad Cell Detection:

• When charge process is started, the charger detects the health status of each of the cellsin the battery compartment. If any battery is unsuitable for charging the status LCD will show flashing full battery icon.

Charging Current:

• The total eight charging channels are divided into two parts equally, 4 on left or right. The charging current would be varied while different number of batteries placing on the compartment. Please find the output current as follows.

Battery Type	Left Side	Right Side	Charging Current
AA / AAA	1 pcs	1 pcs	2000 mA
AA / AAA	2 pcs	2 pcs	1000 mA
AA / AAA	3 pcs	3 pcs	650 mA
AA / AAA	4pcs	4 pcs	500 mA

 

AA 2900 mAh	Charge Time	Charging Current	AAA 1100 mAh	Charge Time	Charge Current
1-2 Pcs	1.4 Hrs	2000 mA	1-2 Pcs	0.6 Hrs	2000 mA
3-4 Pcs	3.0 Hrs	1000 mA	3-4 Pcs	1.1 Hrs	1000 mA
5-6 Pcs	4.2 Hrs	650 mA	5-6 Pcs	1.8 Hrs	650 mA
7-8 Pcs	5.0 Hrs	500 mA	7-8 Pcs	2.2 Hrs	500 mA

 

Specifications of AC Adaptor:

Power supply :	100-240VAC, 50/60 Hz
Input Voltage	12~18V DC 9W

Important Safety Instructions

1.  Before charging, read instruction. 
2. This power unit is intended to be correctly orientated in a vertical or floor mount position 
3. This charger is intended for use with Nickel-metal-hydride rechargeable batteries or Nickel Cadmium rechargeable batteries. Attempting to charge other types of batteries may cause personal injury and damage to the charger. 
4. Do not expose charger to rain or moisture. For indoor use only. 
5. Remove from mains when not in use. 
6. Never use an extension cord or any attachment not recommended by manufacturer, otherwise this may result in a risk of fire, electric shock or injury to persons. 
7. Do not operate the charger if it has been subjected to shock or damage. Take it to a qualified serviceman for repair. 
8. Do not disassemble the charger. Incorrect reassemble may result in a risk of electric shock or fire. 
9. The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. 
10. Before scrapping your charger, remove the batteries from the unit and they are disposed of safety.

Batteries not included.