1,000mA / 2,000mA Smart Charger for 6-12V NiMH NiCd Radio Control Battery Packs

Smart Universal Battery Pack Charger: 6V - 12V, Current Selection With Temperature Sensor

Detailed Description 

• It is a multi-current Universal Fast and Smart Charger for any NiMH battery packs from 6V-12V ( 5-10 cell pack).
• 100-240V AC input for worldwide use.
• Designed for use with 6V-12V Battery Packs. Please don't charge battery pack under 6V or over 12V.
• Please don't charge battery pack with capacity smaller than 1000mAh or  higher than 5000mAh.
• Automatically detect battery pack's voltage;
• Green LED will flash slowly when no battery is plugged in. Red LED will be on during charging. Green LED will be on when battery is fully charged. Red LED will flash when the charger recognizes the battery as damaged or voltage is below 6V. LED will be off if short circuit or polarity is reversed.
• Automatically cut-off by negative delta V detecting or when battery's temperature is over 60°C ; when battery pack gets fully charged, Green LED will be on.
• 4-hour safety timer, charger will stop charging after operates 4 hours.
• Two current levels, e.g. 1.0A and 2.0A are selectable by a switch,
• For battery pack between 1000mAh and 2000mAh, please use the low current level switch - charging rate: 1.0A
• For battery pack between 2000mAh and 5000mAh, please use the high current level switch -- charging rate: 2.0A 
• Fast charging time from approx. 70 mins to 210 mins depending on the capacity of battery. For 5000- mAh battery pack, charging time is about 210 mins (2.0A charging current) and for 2000mAh battery pack, charging time is 150 mins (1.0A charging current).
• It is a smart charger. Just plug in battery and wait for it being charged.
• Dimension: 1.5"H X 2.36"W X 4.67"L.
• Weight: 0.6LB.

• One set of Clip adapter with female Tamiya connector included for charging any type of NiMH battery packs from 6V-12V ( 5-10 cell pack).